It Is About How to Install TV Brackets

It Is About How to Install TV Brackets in SingaporeHave you bought a TV mount but don’t know how to install it? This guide shall provide you with all the instructions needed to mount all the types of TV Brackets in Singapore.

Fixed TV Bracket

  1. Locate all the mounting points on the back of the TV.
    Line up all of the mounting holes in accordance with the back of the TV set.
  2. The fixed mount comes with a decent universal set of screws that can be used with any kind of mount. Start installing the arm to the base of the TV with the allotted screw holes.
  3. If you have a stud finder use it to find the studs located on the wall where you are supposed to attach the TV bracket and mark the
    points with a pencil.
  4. Drill a hole and screw in the mounting screw for the first mount and with the help of a level make sure to orient the mounting bar to 0 degrees and mount the other part of the mounting plate with another screw using a drill.
  5. Screw in the remaining screws for the mount.
  6. Mount the TV to the wall in such a way that the hooks safely attach to the mounting plate

Tilting TV Bracket

  1. Attach all of the carriage bolts and the tension knobs to both of the corresponding arms. You can do this by inserting the carriage bolt into the corresponding slot and tightening the tension knob from the other side.
  2. Attach Both of the arms to the corresponding holes for the TV while using a washer and screws for each of the holes
  3. Locate the nearest stud by using a stud finder on your wall and mark it using a pencil. Afterwards locate a secondary stud to mount the mounting plate.
  4. Screw in the first pilot hole for the stud and screw on the mounting plate using a screw and a drill.
  5. Using a level, set the mounting plate to 0 degrees and mount the other screw by aligning it with the stud marked with the pencil.
  6. Attach the remaining screws or bolts depending upon the size of your mounting plate.
  7. Carefully attach the TV by the arms to the back of the mounting plate.
  8. Tilt the TV to the level that you like and keep it there by using the tension knobs at the back.

Full Motion Single Arm

  1. Find the level at which you would like to mount the TV at.
  2. Using a Stud Finder, find the studs to screw the holes in for the TV mount
  3. Mark the holes for the remaining holes for the TV bracket.
  4. Pre dill all of the holes and ensure vertical alignment for all of the corresponding holes.
  5. Align the mount with the corresponding screw holes and attach lag screws to the the mount.
  6. Select the proper hardware from the included kit to mount them to the back of the holes present on your TV.
  7. Install the screws corresponding to the adaptor plate of the TV mount.
  8. Add the remaining decorative covers to conceal the installation hardware.

Gas Strut TV Mount

  1. Find the level at which you would like to mount the TV at.
  2. Using a Stud Finder, find the studs to screw the holes in for the TV mount.
  3. Mark the holes for the remaining holes for the TV bracket.
  4. Level the Mounting plate using a leveler at level it at 0 degrees.
  5. Screw in all the holes for the mount.
  6. Attach the VESA mounting plate to the back of your TV by aligning the screws with the screw holes.
  7. Attach the handle of the Gas Strut mount to the wall mount and screw in the remaining holes.
  8. Manage all the cables with the included cable management holders.
  9. Adjust the TV to the level at which you would like and tighten the screw for leveling out the TV.

Final Verdict

That wraps up all the instructions for the above mentioned TV mounts. Mounting TVs yourself is hard and asking a freelancer to do it could involve potential risks that may lead to the damage of your TV. If you’re looking for TV Brackets in Singapore or are looking for a professional or reliable company to install TV Brackets in Singapore, you might want to contact TV Bracket Singapore as they offer the best customer service and satisfaction.