Compatible Wall-Mount Brackets and Screw Hole Patterns

Compatible Wall-Mount Brackets and Screw Hole PatternsWow, did you just get that new TV? Sure, that is something to celebrate. But, the question of where to place it is very frustrating. Should you place it on the table or mount it on the wall?

The best and safest idea should be to mount it up where everyone can see it. Yes, the wall!

For this, you will only need a few things.

  • A TV (OFCOURSE)
  • Wall mount or Tv Bracket
  • Installation hardware

Want to know a secret tip?

Always go for the best tv bracket in Singapore. Of course, you are going to mount your TV on the wall and that should not be done with a low-quality mount. Not only will it result in the TV falling, but it can also be dangerous and can cause someone to get hurt.

How can you mount the TV perfectly?

It is very important to use the screws which come with the bracket itself. This ensures that the TV does not fall off. Because, the specific wall bracket has been designed keeping in mind the weight and build of the Tv. So, it is wise to go with the top of the line tv bracket in Singapore.

Step 1: Decide where to mount the TV

This seems simple, right?

Let us burst your bubble!

This is one of the most important steps and requires a lot of technique. You simply can’t go ahead and just start drilling wherever you want to.

For this, pick a location that gives the best view and where there is a socket nearby. This will save you the hassle of connecting wires and extra cables.

You can’t just keep changing the position of the TV. Your walls will be left with huge holes all around. Moreover, it is not that easy

Step 2: Find the wall studs

As we have already mentioned, a layman would find a spot and hang the TV only to find out that you have to find the wall studs first.

For this step, you need to have a good quality wall stud finder. Go over the wall with it and mark the spot where you find the stud.

Step 3: Drill Holes

It is very important to mark the pilot holes. Keep in mind that this step can’t be done alone. Take the wall bracket and ensure it is placed straight. Next, with a pencil mark the place where the holes will be drilled.

With the help of a masonry bit and drill, make the holes.

Step 4: Fix The Bracket On Your Wall

Do you think the tough part is over?

Not really!

Usually, fixing the TV bracket to the wall is not easy either. It needs to be PRECISELY straight and done properly. Otherwise, it can be dangerous.

Secondly, if the bracket is not exactly straight, the entire look of the TV will be incorrect.

So, with a drill, fix the screws inside.

Step 5: Put The Mounting Plate On The TV

After you have found the holes for the mounting plate on the back of the TV, go ahead and attach the plate to the back of the TV.

Step 6: Put The TV Up

Now that you have everything ready, it is time to mount the TV on the wall. With all the steps done, this last step is very critical and requires utmost patience and care.

Moreover, you can’t do it alone. You need a partner.

Grab one side of the TV while your partner grabs the other and hold it up. Next, put the mounting plate on the TV. By following the instructions of the manufacturer, connect the plate on the back of the TV to the wall bracket.

Tip: Each TV and wall bracket has a different set of instruction. Hence, it is important to read the manual and instructions thoroughly.

Step 7: Check The Connections

Once the TV is mounted, check the connections.

If you notice, there are so many things that can go wrong here! From the TV slipping from your hands due to the wrong posture, to screwing up the screws, each step has something that needs expert intervention.

Trust us when we say we have the best TV bracket in Singapore.  After all, we have been in business for more than 6- years.

Says a lot about our experience, doesn’t it?

Hence, leave your installation worries to us. Grab a cup of tea, give us a call and enjoy your TV!